Differences

This shows you the differences between two versions of the page.

--- en:projects:bsp:lcm3 [2008/11/25 11:31]
bardet
+++ en:projects:bsp:lcm3 [2016/04/22 15:47]
chiurtu
@@ Line 1: / Line 1: @@
-Bachelor semester project: 2008-2009
+==== Wireless communication system using Software Defined Radio platforms ====
 \\
+**Background:**\\
+Software Defined Radio (SDR) is a new paradigm that allows to change any aspect
+of a communication protocol, including the signaling method, by changing the
+software. The only limitation is the bandwidth of RF (radio frequency) part.
+(Back-end for the transmitter, and front-end for the receiver.)\\
+At LCM (Mobile Communications Laboratory),  we are currently
+using the bladeRF SDR platform (http://www.nuand.com/) for various
+projects and purposes, including for example the acquisition of a GPS
+signal (which is used in the SDR class).\\
-==== Télécommande ====
+\\
-=== Introduction ===
+**Objectives:**\\
+The goal of this project is to implement an over-the-air communication
+system using two bladeRF modules, one at each end of the wireless link.
+Some of the basic blocks are already implemented in Matlab (data source,
+modulator, pulse shaper, matched filter, demodulator, error correction mechanism).\\
+In order to have a fully operational
+wireless link, there are several modules that are still missing. The purpose of this project
+is to implement them. First, one needs to
+perform the clock synchronization between the transmitter and the receiver.
+Next, one has to synchronize the received data and detect the start/end
+of the transmitted blocks/frames. Finally, one has to estimate the
+channel parameters, using some training data. Once these blocks are implemented,
+a fully operational transmission chain should be demonstrated.\\
-Dans le modélisme (voiture, avion, hélicoptère, ...) on a généralement recours à
+\\
-des télécommandes.
+**Prerequisites:**
+Matlab, COM-302 Principles of digital communications (or equivalent).\\
+(COM-511 Software-defined radio: A hands-on course is a plus. This can be taken in parallel.)\\
-Une télécommande fonctionne avec des pulses modulées en largeur (PWM) et le tout
+\\
-modulé en FM.
+**Laboratory:** LCM, IC faculty\\
-L'idée du projet est d'utiliser le « Softvare defined radio testbed » comme une télécommande.
+\\
+**Project available for:** Master in Communication Systems / Computer Science \\
-La partie réception est déjà implémentée mais il reste à faire la partie
+\\
-d'émission.
+**Number of students:** 1\\
-=== Mission ===
+\\
+**Supervisor:**\\
+Nicolae Chiurtu, tel: 35657, office INR 138, nicolae.chiurtu@epfl.ch\\
-Implémenter sur la Software Radio la chaîne d'émission pour la télécommande.
+\\
+**Professor:**\\
+Bixio Rimoldi, tel: 32679, office INR 111, bixio.rimoldi@epfl.ch\\
+\\
-=== Ressources ===
+[[en:projects|Back to projects menu]]
-  * [[http://ipg/doku.php?id=en:research:sr:software_radio|Software Radio]].
-  * [[http://ipg/doku.php?id=en:research:sr:remote_control|Informations relative
-à la télécommande]].
-=== Pré-requis ===
-n'est pas important, 5 est très important.
-  * Programmation en C : 4
-  * Théorie de la communication : 3
-  * Protocole de transmission : 2
-===Superviseur===
-Stéphane Brunner, télephone : 37552, bureau : INR 138, stephane.brunner@epfl.ch
-===Professeur===
-Bixio Rimoldi
-\\
-[[en:projects:bachelor:bsp|back to bachelor semester projects menu]]